Magnaflux Accessories

(#43530-115V)
Y-6 Yoke 230V (#43540-230V)

• For detection of surface cracks
• Pull force (10 lbs. AC) complies with all industry specifications
• Solid state controls located in housing fro maximum safety and reliability
• 2-minute on/off duty cycle for fast, efficient inspections

(#50651)

• For detection of surface cracks
• 10" coil I.D., 15" coil O.D.
• Wear-resistant neoprene coating
• Equipped with footswitch for energizing magnetic current
• 10' flexible line cable
• 115V, 60Hz, single-phase power source required

(#611700)

• Accessory for use with any magnetic particle unit or power pack
• Non-contact method of applying field
• Allows for quick, easy processing of small parts, such as fasteners, ring-like parts…several parts at a time

A) Lead Contact Plate (#605647)

• Duplicates original headstock/tailstock contact plates
• Soft lead plate provides excellent contact
• 1/4" x 6 3/4" x 6 5/8"
• Fits all units except A-915 and MAG Series units

B) Heavy-Duty Lead Contact Plate (#605657)

• Braided copper impregnated with lead
• Lasts up to 10 times longer than solid lead contact plates
• 1/4" x 6 3/4" x 6 5/8"
• Fits all units except A-915 and MAG Series units

C) Lead Contact Plate (#169542)

• Similar to #605647, fits A-915 and MAG Series units
• 1/4" x 5 1/4" x 6 3/4"

A) Double-Braided Pad with V-Block (#18948)

• Heavy copper braid over neoprene base
• Molded-in V-block centers and supports test parts
• Flexible, provides contact over greater surface area
• Reversible — two wear faces
• Fits all units except A-915 and MAG Series units

B) Double-Braided Pad with Clip (#18949)

• Similar to #18948, but clips over headstock of A-915 and MAG Series units

Replacement Pad (#1848)

• Replacement copper pad for #18948 or #18949

Coils

12" Coil (#28501)
16" Coil (#28511)
20" Coil (#28531)
25" Coil (#28541)

• 5-turn coils in various diameters for all units, except A-915 and MAG III Series units

Coil Base (#26193)

• For use with coils on all units, except for A-915 and MAG Series units

12" Coil (#169584)

• 5-turn coil, similar to #28501
• Fits A-915 and MAG III Series units

Coil Base (#169579)

• For use with #169584 on A-915 and MAG III Series units

Coil Base (#196715)

• For use on MAG IV, MAG V and MAG VI units only

These solid copper rods provide circular magnetization of hollow parts. Three sizes are available.

• A) 3/4" x 24" (#111203)
• B) 1" x 18" (#111204)
• C) 1/2" x 12" (#111202)
• D) Set of Three A, B & C (#111205)

Standard Prod Set (#157662)

• Individual contact prods offer maximum flexibility in prod-spacing and magnetizing of complex-shaped parts
• With 3 PTL plug for P-Series portable power packs

Prod Set (#157660)

• Same as #157662, but with 4 PTL plug
• Replacement Tip (#152652) also available

Braided Tip Prod Set (#186195)

• Similar to #157662, but with braid tips for better contact
• With 3 PTL plug for P-Series portable power packs

Braided Tip Prod Set (#186194)

• Same as #186195, but with 4 PTL plug
• Braided Replacement Tip (#78103) also available

Braided Conversion Assembly (#186202)

• Converts solid tips to braid tips — two required

Remote Control Cable, 15'
(#157657)

• Allows remote energization of portable power packs
• Standard with 3 PTL plug
   

Remote Palm Button
(#169621)

• Mounts on side of MAG Kit for energizing current from power pack
• Standard with 3 PTL plug
   
  

Standard 4/0 Cable Assemblies

Custom 4/0 and 1 million circular mill cable assemblies are also available

Rubber-covered flexible cables are available in standard lengths of 10', 15', and 20' with your choice of eitherend or lug connectors. Individual connectors to replace those worn or damaged in use are also available.

A) 4/0 Eitherend Connector (#1238)

• Allows quick cable disconnect for maximum flexibility

B) 4/0 Lug (#2590)

• For permanent attachment to magnetizing equipment

C) Eitherend Lug Adaptor (#1574)

• Changes lug terminals to eitherend terminals

D) Eitherend Lug Adaptor, 90° (#1576)

• Similar to #1574, but at a 90° angl

Powder Spray Bulb

(#501232)

• Lightweight, easy-to-use spray bulb for applying Magnaflux dry powders
• Cap removes for easy filling

Price: $23.00

Quantitative Quality Indicators (QQI) Artificial flaw shim standards for MPI increase productivity by minimizing magnetizing “shots” Are placed on part surface to verify field direction and relative strength Particularly useful for balancing multi-directional fields Approved by major specifications including ASTM E 1444 (replaced MIL-STD-1949A)

A) Standard QQI Model KSC 230 (#519630)

• Basic circular and crossed bar flaw configuration suitable for longitudinal and circular fields
• .0006" flaw depth amounts to 30% of shim thickness

B) Miniature QQI Model KSC 4-230 (#519631)

• Similar to KSC 230, except miniature design for small areas on test part
• Four circles per sheet may be cut apart for individual use

C) Variable Depth QQI Model KSCT 234 (#519632)

• For more quantitative work, three concentric circular flaws of differing depth, .0004", .0006", and .0008" (20%, 30%, 40%)

Ketos Test Ring (#159999)

• Drilled holes simulate subsurface discontinuities
• Form surface indications at various magnetizing current levels
• Meets ASTM E 1444 (replaced MIL-STD-1949A) requirements

Magnetic Particle Test Bar (#189838)

• Contains coarse and fine artificial surface and subsurface defects in both directions
• Meets or exceeds most industrial and military specifications for artificial test specimens, including MIL-STD-271

Pie Field Indicator (#PIEGAUGE)

• Used to establish adequacy of field per requirements of MIL-STD-271, ASTM E709 and ASTM E 1444 (replaced MIL-STD-1949A)

A) Field Indicator (#2480)

• Rugged, pocket-size meter used to indicate residual magnetism remaining in part after demagnetization
• Inexpensive unit cannot be recalibrated

B) 10 Gauss Calibrated Indicator (#505056)

• Offers highly accurate measurement of residual leakage field in parts after demagnetization
• Accurate to ± 0.3 gauss. Scale range of 10-0-10
• Meets requirements of McDonnell-Douglas specifications

C) 20 Gauss Calibrated Indicator (#105645)

• Accurate to ± 0.5 gauss. Scale range of 20-0-20

A) 14A Centrifuge Tube (#8493)

• 100 ml, 0-1.0 ml in 0.05 increments
• For use with #14A, #14AM and #20B MAGNAGLO fluorescent materials

7C/9C Centrifuge Tube (#2461)

• 100 ml, 0-1.5 ml in 0.10 increments
• For Magnaflux color-contrast materials including #7C, #9C and #9CM

MG-410 Centrifuge Tube (#507923)

• 100 ml, 0-0.2 ml in 0.01 increments
• For use with MG-410

B) Centrifuge Tube Stand (#1837A)

• Safely holds centrifuge tubes when mixing bath concentrations

With MAGNAFLUX centrifuge tubes, you can monitor the concentration and level of contamination of magnetic particles in MAGNAFLUX or MAGNAGLO baths.